Eight Reasons Why Your AC Won't Turn On-And What to Do

Things can get stuffy fast when your air conditioner won't turn on in Winnipeg. Thankfully, Winnipeg Supply Service Experts is here to help you remain cool, even when your AC isn't functioning properly. Here are eight possible reasons why your air conditioner won't turn on and how to fix them.

1) Check the Thermostat

The easiest explanation for your AC not turning on is a thermostat issue. Double check your thermostat is on, set to "cool," and that the temperature is set to a few degrees lower than the normal ambient temperature of your home. You may also need to replace the batteries. If that doesn't take care of the issue, the temperature sensor in the thermostat could be inaccurate. A thermostat that can't read the set temperature could prevent your air conditioner from turning on. Once you've verified that the thermostat is faulty, it's time to replace it. If you can't decide on a thermostat that's right for your residence, speak with an Expert to help determine the best choice.

2) Check the Air Filter

Your air filter should be exchanged every 30-60 days at minimum. You should change them more often depending on the number of pets and people living in your home, in addition to the local air pollution levels close to your residence. A dirty air filter can impact airflow, causing your air conditioner to freeze and not turn on.

If your air filter looks dirty or you can't remember the last time you changed it, it's time to get a new one. If your AC was frozen, wait for it to thaw after changing the filter before turning it back on.

3) Check the Circuit Breaker

Open the electrical panel inside your home and attempt to see if the circuit breaker connected to your air conditioner is tripped. You can identify if the breaker is tripped if the switch has shifted to the "OFF" position. To resolve this issue, simply flip the breaker so that it's in the "ON" position.

If your AC continues to trip the breaker after resolving this issue, you could have a serious problem and should get in touch with the Experts at Winnipeg Supply Service Experts to keep it from damaging your home or air conditioner.

4) Check the Indoor Shutoff Switch

Often mistaken for a light switch, if your AC won't turn on, the indoor shutoff switch might have been flipped unintentionally. These switches are usually found near your furnace, in a closet, crawl space or attic. Once you find the shutoff switch, confirm it's in the "OFF" position. If so, just turn it back on. It's always a good idea to label this switch to prevent anyone from mistakenly shifting it off.

5) Check the Outdoor Shutoff Switch

If you or someone else has recently serviced your air conditioner, they may have turned off the external shutoff switch as a safety precaution. First, identify the external shutoff switch, which should be near your AC unit. If the switch is in the "OFF" position, you’ll need to flip it to allow your air conditioner to turn on.

6) Identify the AC's Reset Button

When your air conditioner won't turn on, it might simply need to be reset. Not all ACs have a reset button, so first find out if your unit does. If you can find the reset button, move it before going to turn your AC on again. If you can't reach the reset button, manually reset your air conditioner by shutting your thermostat off for five to 10 minutes before turning it back on again.

7) Inspect the AC for Ice Buildup

Look over the air conditioner for any ice buildup either on or inside the unit. If you discover ice on your machine, you need to wait for it to defrost before trying to start the unit or you risk damaging the AC. Though there are various reasons you might see ice on your air conditioner, it's always smartest to call Winnipeg Supply Service Experts for a consultation to prevent further damage from occurring.

8) Ensure the Condensate Drain Isn't Clogged

If you don't see ice on the air conditioner, the condensate drain could be backed up. When clogged, your AC won't turn on as a safety precaution. To resolve the issue, unclog the drain line using suction from a wet/dry vac. Test that you've fixed the blockage by pouring a small amount of clear water and watching it flow out. For serious clogs, it may be best to call the Experts.

AC Still Won't Turn On? Call Winnipeg Supply Service Experts!

There's no reason to suffer without air conditioning—reach out to your local HVAC Experts in Winnipeg to help resolve why your AC won't turn on. Our well- trained technicians can figure out why your unit isn't working, and complete a repair or install a replacement. And with Winnipeg Supply Service Experts, your satisfaction is guaranteed!*

Contact us at 866-397-3787 to schedule your air conditioning appointment in Winnipeg today!

Contact Us