5 Reasons Why Your Air Conditioner May Not Feel Cool

When the mercury starts to rise outdoors, you rely on your air conditioner to keep your home cozy. Your AC could be running, but the air issuing from your vents appears too hot.

Here are the most frequent reasons why this happens and what you can do about it. If you require air conditioning repair in Winnipeg, the Experts at Winnipeg Supply Service Experts can help. Like always, all our AC repair labor is backed by a 100% Satisfaction Guarantee.*

1.Your Thermostat is Set Wrong

Look at the fan setting. If it is switched to “on,” the fan will blow even when the AC compressor isn’t going. This is okay, but your cooling costs will go up if the fan operates constantly. Adjust the setting to “auto,” and the blower will only run when the compressor is working. This also means the air coming from the vents will always seem chilly.

2.Filter Need to be Changed

The HVAC air filter traps airborne particles that can damage your heating and cooling equipment. If it gets too clogged, it can lower airflow. This limits how much warm air moves over the indoor evaporator coil. If the refrigerant passing through the coil becomes too cold, it freezes, preventing the cooling cycle from taking place. To prevent this, change the filter monthly or as suggested by the manufacturer.

3.Refrigerant is Low

Refrigerant is essential for air conditioning. It changes from a low-pressure gas to a high-pressure liquid as it cycles between the indoor evaporator coil and outdoor condensing unit. If there isn’t enough refrigerant, your air conditioner will cool poorly and may not produce enough cool air. It may also lead to a frozen evaporator coil, which as previously mentioned, stops the cooling cycle completely. You’ll need aid from an HVAC tech, like one from Winnipeg Supply Service Experts, to solve any refrigerant leaks.

4.Condensing Unit Need to be Cleaned

The outdoor piece of your AC unit is referred to as a condenser. This is essentially a big heat sink that removes muggy air from your house. If the metal fins are clogged with dirt, the condenser can’t do its job. Rinse down the equipment to eliminate debris that builds up and shear back grass to ensure the condenser can “breathe.”

5.Condenser Fan or Compressor has Gone Bad

While you’re inspecting the condenser, make sure the big fan near the top of the system is working. If the fan motor has gone out, the condensing unit can’t break up heat properly, and your air conditioner might start circulating hot air into your house.

Take time to hear the compressor working in the condensing unit also. This is what drives your air conditioner, as the piece lowers the temperature of the refrigerant. Then, the refrigerant can trap more humidity when it circulates back into your home. If the compressor fails, you’ll typically need to buy a new air conditioner and book air conditioning installation.

If you’re hearing other strange noises when your system is on, browse our guide that explains what common air conditioning noises mean.

Did you solve the problem using these suggestions? If not, our Winnipeg Supply Service Experts Experts are available to help you. Get in touch with us at 204-800-0613 or contact us online to request your air conditioning repair appointment today.

Contact Us